Thermal Treatments for Steel are an essential process for good performance of the steel pieces. They allow machining work to be faster and to cost less, giving materials greater productivity.
The flattening press exerts pressure on specific points of the material to exceed the elastic limit and cause a certain deformation. It is used to achieve flatness or a specific curve in materials.
This is an essential process for good performance of the steel pieces. It eliminates the hardness caused by oxy-fuel cutting on the surface of the cut pieces, improving machinability and also eliminating tensions which may have been caused by hot cutting, to facilitate subsequent machining.
It is mainly used for:
This process presses the material at key points, exceeding the elastic limit and causing a certain deformation, achieving flatness or a specific curve in the steel.
Press with 500 tonne capacity. Pieces up to 130mm thick.
Example of transformation
by thermal treatment
1. 1. The client sends us the plans of the pieces necessary for constructing this chassis.
2. We cut the S355J2+N quality sheets to thicknesses of 20, 25, 30 and 40mm. Total of 6.7TN of material.
3. The client welds the pieces for manufacturing the chassis in their installations.
4. 4. The client sends us the chassis to carry out a tension relief treatment. In this case, a cycle of 6.5 hour at a maximum temperature of 620º. Certified cycle.
In this way, the client has a homogeneous piece to be able to machine the final measurements.
Welded chassis of almost 7 TN, S355J2+N quality, width 2,200mm.
We will transform the future
Steels to fulfill all missions: Hardox, Toolox, S355J2+N, C45+S, S690QL, S890QL, 1.2080, 1.2344, 1.2360, 1.2379, 1.2436, 1.2746, 1.2767, 1.2842…
Capacity creates opportunity. Always having a planned provision of stock allows us to always be prepared for your project.
According to EN 10204
Always up to date
Information and follow-up
Always available
Finishing and deburring
Pure transformation surface
Making the impossible possible
We work with heavy materials, that is why our processes are agile. We are organized to respond to your requirements quickly, from your call to the transport of material with our own fleet.
If there is a way to get a piece as you need it, we will find it. Because there are pieces that make everything fit together, our piece is the commitment to the success of your project.
Our engineers are one of your team. The CAD-CAM department gets involved in your project and assumes your challenges as its own. With the philosophy of the transforming spirit, anything is possible.
Each project is a small challenge for improvement and innovation.
We know steel as part of us that it is and we transform it so that it is also part of you. It does not matter if it is a simple or complex requirement, what matters is getting the exact part that fits your project and what you expect from it.
Steel is a noble material that our team knows how to treat with nobility.
Give human value to your constructions
